孤城浪子的地盘

简介

大多数 笔记本电脑需要使用功能键来激活或解除笔记本的视频信号输出。由于大多数笔记本的激活或解除是以拨动开关的形式来切换：重复按切换键来显示笔记本上的画面 和投影仪上的画面，或者让两者同时都显示。但如果投影仪上的默认分辨率不能匹配笔记本上 LCD  显示的分辨率，同时显示画面将不能实现。某些笔记本还将需要关机再启动，来实现和投影仪的最佳匹配。

下面的表格列出了各笔记本厂家及型号所设置的视频切换键

笔记本品牌		型号	切换视频的执行键
Acer		Note 350, 750, 760,  780, 950	Ctrl-Alt-ESC  while computer boots activates the setup menu; system config; advanced  sys config; display device; LCD/CRT
		Note 971	FN + F5
AST		Ascentia, Ascentia A series,  PowerExec, 9xxN	FN + F5
		Ascentia J Series	FN + F3
		Ascentia P Series, Bravo, 800N, B5N	FN + F12
		Premium	FN + D
Altima		All	Shift-Ctrl-Alt-C
Ambra		All	Ctrl-Alt-Esc for set-up screenFN +  F2FN + F5
Amrel		All	Set-up  screenShift-Ctrl-D
AMS		Power CD	FN + F2
AMT		NP-743D	Set-up (Advanced) Screen Display Select CRT or LCD
AT&T		3181, Globalyst 250	FN + F3
		Clobalyst  200, Globalyst 3150 Safari	FN + F6
Austin		All	Ctrl-Alt-CommaFN + F12
Award		Modular Notebook	FN + F6
Computer		Model	Key Command to Activate/Deactivate  Port
Bondwell		All	reboot  for LCD or CRT options to appear
Canon		BTO	FN + F6
		Innova 386NX	Setup Menu Option
		Innova Book  360CD, 490CDS	FN + F7
		NoteJet 3CX	Change CMOS to CRT
Chaplet		All	Select from set-up screenFN + F6FN  + F4
Chembook		All	FN + F6
Chicony		All	Ctrl-Alt-EscAutomatic
		All	Ctrl-alt-#6FN + F7FN +  F4
Compaq		Armada, LTE, Contura	FN + F4
		Presario	FN + F2
		Other	Automatic, Ctrl-Alt<
CompuAdd		NBE 780	FN + F3 Set-up select DisplayLCD/CRT
		Other	Automatic
Compudyne		Laptop	Ctrl-Shift-D or set-up screen
		N386SXE	FN + F8
Data  General		All	Ctrl-Alt-Command
Data  View		All	Ctrl-Shift-M
DEC		HiNote	FN + F4
		425 SL	FN + F5
		Other	Automatic
Dell		Latitude, CP-Inspiron	FN + F8FN + F12
		Other	Ctrl-Alt-<FN + D
Dolch		All	Set Switch to CRT before boot-up
笔 记本品牌		型 号	切换视频的执行 键
Epson		650C  Set	Switch  to CRT
		Other	FN +  F12
EPS Technologies		L166MMX, MP-975A	FN + F4
Everex		All	Select from set-up screen
		Other	FN + F10
Fujitsu		Lifebook	FN + F10
Gateway		Solo, Liberty	FN + F3
		Colorbook	FN + F1
		Colorbook 2	Option in CMOS setup
Grid		All	Ctrl-Alt-TabFN + F2
Hitachi		M120T/1000, M100D	FN + F7
		E100D/810	FN + F8
Hyundai		All	Set-up screen option
Hewlett  Packard		All	HP notebook PCs  FN + F5
IBM		Thinkpad 310, 36x, 380,  701, 75X, 760, 560, 770	FN  + F7
		Thinkpad 350, PS/Note 425C	FN +F1 for setup
		LX40   Setup	LCD to CRT
		Thinkpad  700	Ctrl-LT-S
Infotel		Ultra	FN + F12
Jetbook		All	FN + F6FN + F12
Kaypro		All	Boot with monitor con
Kris  Tech		All	FN + F8
Macintosh		PowerBook 3400	Select Monitor Icon on  PowerBookControl Strip, Select Resolution to match display device (e.g.  800x600 Sinulscan for simultaneous display on PowerBook and on  projector)
		PowerBook 1400	Requires Optional Video Card. Select Monitor Icon on  PowerBook Control Strip, Select Resolution to match display device (e.g.  800x600 Simulscan for simultaneous display on PowerBook and on  projector)
		PowerBook 160, 165, 180, 520, 540, 5300	Control Panel Folder, PowerBook  Display folder, Activate Video Mirroring, warm reboot.Or (if display  problems occur w/mirroring) Control Panel folder, Monitors, switch  primary display by dragging white menu bar to monitor 2
		PowerBook  140, 145, 150, 170	No  Video Port. Requires 3rd party interface
		Portable 100	Not Compatible
Magitronic		All	FN + F4
Mastersport		All	FN + F2
Micron  Millenia,		Transport	FN + F2FN + F12
Midwest  Micro		Elite	FN + F11
Mitsubishi		All	SW2 On Off Off Off to activateSW2  Off On On On to de-activate
Computer		Model	Key Command to Activate/Deactivate Port
NCR		All	Set-up screen option
NEC		Versa 2000, 4000  series, 5000 series, 6000 series, M, P, V, MX series, Ultralite	FN + F3
		Versa 2400	FN + F10
		Versa S	FN + F2
		Other	Select ';Active'; from set-up
Parkard  Bell		All	FN + F10FN + F2
Panasonic		All	FN + F2Panasonic set-up program
ProStar		5200, 6200, 12000	FN + F6
		Other	Ctrl-Alt-S at startup
Sager		All	FN + F6
		NP8600	FN + F9
Sampo		All	CTRL-ALT SHIFT C
Samsung		810	FN + F4
		55200	Set-up screen option
		Pro 500	FN +F5  Pro 800,
		Sens 700	FN + F6
Sanyo		All	Set-up screen option
Sharp		All	FN + F5
Sotec		PC3020, PC9000, PC9020	FN +F5
		Other	FN +F1
Tandy		All	Ctrl-Alt-Insert
Tangent		All	FN + F5
Texas Instruments		370, 390, Travelmate 7000,  Extensa 36x	FN + F2FN +  F3
		Travelmate 2000	Switch CRT On
		Travelmate LT286/45	Press SETUP key on keyboard
		3000	Type ALTVID at DOS Prompt
		4000	Ctrl-Alt-Setup
		4000M and  4000E	FN + Setup at DOS  prompt - Screen Display = BOTH
		5000	Ctrl-Alt-Esc
		5100/5200	Win95 Control Panel, TI SETUP, System Config,  Display device, LCD/CRT/both. Win 3.1 Travelmate n/b Setup, TI SETUP,  System Config, Display device, LCD/CRT/both
		6020, 6030,  6050,	Extensa 600CD,  650CDT  FN + F12
		Extensa 5xx/6xx Series	FN + F10
		Other	FN + F5
Top-Link		All	Set-up Screen optionFN + F6
Toshiba		1000, 1200, 1600,  3100E, 3200	FN + End
		1100	Ctrl-Alt-End
		1850	Reboot
		T1910  Satellite	Automatic,  no simultaneous display
		T1950CT, T1960CT	type TSetup at DOS prompt Select display  location int/ext/both (internal, external, or both displays)
		105CS,  110CT, 115CS, 200CDS, 400, 410, 415, 420, 430, 500CDT, 610, 650CT  2100CT, 2105CT, 2130CS, 2150CS, 2150CDT, 2150CT, 2400CS, 2400CT, 2450CT,  3600DT, 4500, 4700, 4800, 4850, 4900, Tecra 700CDT, 720CDT, 730CDT	FN + F5
		3100	Ctrl-Alt-End
		3100E, 3200	FN + ENd
		3100SX,  3200SX	N/A PORT ACTIVE
		3400	Needs SCSI Adapter for ext. video
		4400sx	N/A PORT ACTIVE
		5100	Ctrl-Alt-End
		5100/100,  5200, 5200/100	N/A PORT  ACTIVE
		610CT	Needs  SCSI adapter for ext. video
Twinhead		Slimnote 5100T, 9133CX	FN + F5
		Slimnote 8xx  Series	FN + F5
US  Logic		All	FN + F8
Winbook		XP, XP5	FN + F6 (sinul) FN + F10 (int/ext)
		XP5 Pro,	FX   FN + F12
		XL	FN + F2
		LM	FN + F8
Wyse		All	Software Driven
Zenith		Z-Noteflex, Z-StarEX	FN +F10
		Z-NoteGT	FN + F7
Zeos		486	CTRL-SHIFT D
		486 Meridian	FN + F1